Brief Introduction:
This series of heat insulating gear pump is used to transfer different medium. such as heavy oil, asphalt,resin. detergent and glue, which not includes soild particles and the temperature not higher than 300ºC, with soildifying character under the normal temperature. It also applies to the site with heat insulated requirement in the process technology and outdoors installation at very cold area.
This series of heat insulating geat pump belongs to external gear pump. The tooth form is composite formed by arc and sine Curve. It could transfer many kinds of medium with steady output flow and pressure. There are heat insulating jacket and inlet and outlet joints, on the pump casing, so it could adopt the media, such as heat-conducing oil, steam, hot water and cold water to hear, keep warm and cooling the transferred medium and pump. When the viscosity of transferred medium is larger than 1500cst, speed should be reduced.
Structure Drawing of Heat Insulating Pump
This series of heat insulating gear pump has simple and compact structure.It is convenient for use and maintenance. The main parts adopt high quality steel with precise processing, so it has good quality. It has good performance of self-priming . so it need not to be filled oil before operate the pump every time. Watch the pump from motor , the rotation direction is clockwise.
1.Pump Casing
One pair of gears and four bearing stands were set in the hole of pump casing. The front cover and the back cover were set at ahead and behind. User could connect the pipe line by using fllanges at beth sides, and conner the heat insulated medium to preserve heat of chamber of pump by using two screwed holes on the top of pump casing.
2.Gear and Shaft
Spiral gear and shaft compose of shaft-gear. The helical shaft gear and herringbone shaft gear could be adopted according to different apecificatons of capacity.
3.Bearing stand and bush
After the bearing stand and bush are firred together, put them into the pump casing and support the gear operate.
4.Gasket
Gasket is put at compact plane between the pump body and front or back cover; it enhance the seal ability of jointing plane.
5.Shaft Seal
Shaft seal has axial sealing function for the input shaft end of pump. There is shaft packing room in the front cover of pump. It could be equipped with mechanical seal or packing.
| Model |
Port (mm) |
Capacity (m3/h) |
Different
Pressure
(Mpa) |
Speed (r/min) |
Motor Power
(KW) |
| YCB0.6-0.6G |
25 |
0.6 |
0.6 |
910 |
0.75 |
| YCB1.6-0.6G |
32 |
1.6 |
910 |
0.75 |
| YCB3.3-0.6G |
40 |
3.3 |
940 |
1.5 |
| YCB4-0.6G |
50 |
4 |
940 |
1.5 |
| YCB8-0.6G |
65 |
8 |
960 |
3 |
| YCB10-0.6G |
65 |
10 |
970 |
4 |
| YCB20-0.6G |
80 |
20 |
970 |
7.5 |
| YCB25-0.6G |
80 |
25 |
970 |
11 |
| YCB30-0.6G |
100 |
30 |
970 |
11 |
| YCB40-0.6G |
125 |
40 |
970 |
15 |
| YCB50-0.6G |
125 |
50 |
970 |
22 |
Audited Supplier 
){kind=link}
){kind=link}